peralatan industri pembinaan

Building Safety Net is made from high density polyethylene(HDPE). We should use high technics to draw the wire first, then weave the wire in specific way. After weaved, we add rope and tether on the side of the netting. There are also burning-resist components in the plastic safety purse netting it can avoid occuring unexpected fire.

More Details...

Expanded Galvd Rib Lath is Expanded Metal lath stiffened by longitudinal steel ribs, formed in the same sheet of metal. The mesh areas of the lath are expanded by cutting and stretching in the sheet of metal, the ribs being simultaneously roll-formed.

More Details...

Hy-Rib is an expanded metal sheet product, specifically developed for use as permanent formwork to concrete. The profile of the open mesh, in combination with the Hy-Rib tangs, allow the development of dense concrete nodules and indents on the face of the Hy-Rib, forming an enhanced mechanical key for the second phase pour.

More Details...

A lattice girder is a type of girder with a criss-crossed web design, such as in gardening lattices, between the two edges of the girder.

It is manufactured using high strength steel wire which provides rigidity to the panel and enables it to bind easily with in-situ concrete which is poured later on site.

More Details...

PRODUCT DESCRIPTIONS

PRODUCT DESCRIPTIONS

KIMMU THE FORM TIE system prevents breakage in the formwork, thus keeping concrete structures in good shape without discolouration. Besides ease of assembly and removal, the system saves construction costs as all parts are reusable except for the separator, which is casted into the wall.

KIMMU PLASTIC SLEEVING are used at the end of the PVC tube or cone holding cast in the same distance and prevent them from any leakage. Due angles and gap at the end can be filled easily by filling materials.



 

KIMMU TMP CHAIR WITH PLATE  designed for use on soft ground or insulation, waterproof membranes or in ground floor slabs, where its large base area prevents puncturing of polyethylene film and fives firm support to the reinforcing steel.

KIMMU TILE SPACER help you achieve a professional-looking tile installation. The spacers keep grout lines the same width and help to line up tiles at the corners.

More Details...

KIMMU WALL SPACER functions are reinforcing mat connector and distance spacers for the vertical formwork. No previous u-hooks to bend, no tying, no separate spacers required. A work saving method : Only to clip onto the reinforcing bars.



 

KIMMU WHEEL SPACER are used to ensure that correct cover is maintained througout the structure.

More Details...

KIMMU STEEL CHAIR BAR also known as wire spacer. It is made of machine bent hard drawn steel wires of diameter 4.5 – 6mm with plastic tips at the legs to prevent rusty. Mainly used for construction such as buldings, houses, bridges, etc, to provide support for reinforcing mesh and bar, when laying concrete slab or formwork.

More Details...